Specs Multi-Purpose CCD Laser Micrometer IG series

Model		IG-010	IG-028
Image
Operation principle		CCD method
Light source	Wavelength	660 nm (Visible light semiconductor laser)
	FDA	Class 1^*1
	IEC/JIS	Class 1
Mounting distance		0 to 1000 mm	0 to 1500 mm
Measurement range		10 mm	28 mm
Sampling cycle		980 µs (When the number of times for averaging is set to [hsp]: 490 µs)
Minimum detectable object	High sensitivity mode	ø0.1 mm (Setting distance: 100 mm)^*2
	Standard mode	ø0.2 mm (Setting distance: 40 mm), ø0.5 mm (Setting distance: 500 mm)^*2	ø0.2 mm (Setting distance: 50 mm), ø0.5 mm (Setting distance: 500 mm)^*2
Repeatability		5 µm (Setting distance: 100 mm) 10 µm (Setting distance: 500 mm) 80 µm (Setting distance: 1,000 mm)^*3	5 µm (Setting distance: 100 mm) 10 µm (Setting distance: 500 mm) 80 µm (Setting distance: 1,000 mm) 140 µm (Setting distance: 1,500 mm)^*3
Linearity		±0.28 % of F.S. (±28 µm)^*4	±0.1 % of F.S. (±28 µm)^*4
Temperature characteristics		±0.03 % of F.S./°C (±3 µm/°C)^*5	±0.01 % of F.S./°C (±3 µm/°C)^*5
Operation indicator	Transmitter	Optical axis alignment indicator: Green LED Power indicator: Green LED
	Receiver	Optical axis alignment indicator: Green LED Position monitor: Dual bar LED (Red, Green)
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 5,000 lux, Sunlight: 5,000 lux^*6
	Ambient temperature	-10 to +45 °C (No freezing)
	Relative humidity	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material	Case	Zinc die-cast (Lower case), PBT (Upper case), Polyarylate (PAR) (Display part), SUS304 (Metallic part)
	Lens cover	Glass
	Cable	PVC
Accessories		Transmitter × 1, Receiver × 1, Sensor head cables (2 m) × 2
Weight		Approx. 380 g (including supplied items)	Approx. 500 g (including supplied items)
^1 The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 When the measurement target object is measured at the centre position of the setting distance. When the measurement mode is set to the glass edge mode, a glass edge of C0.1 mm or more can be detected (Setting distance: 500 mm). ^3 When the light is shielded by half at the centre position of the setting distance. Vibration width when the average number of times is set to 16 and sampling is performed for 30 seconds. (When the analogue output is used, the margin of error of analogue output is added.) ^4 When the setting distance is 100 mm and light is shielded at 50 mm position from the receiver. Margin of error to the ideal line. ^5 When the setting distance is 100 mm and light is shielded by half at 50 mm position from the receiver. ^6 Excluding when the average number of times is set to [hsp].

Model				IG-1000	IG-1500
Image
Type				DIN rail mount	Panel mount
Main unit/Expansion unit				Main unit
Analogue output				Yes
Power consumption (including Analogue current output)	Normaｌ			2700 mW or less (at 30 V: 90 mA or less)^*1	2880 mW or less (at 30 V: 96 mA or less)^*1
	Power saving function (HALF)			2300 mW (at 30 V: 77 mA or less)^*1
	Power saving function (ALL)			2200 mW (at 30 V: 74 mA or less)^*1
Digital display method				Dual 7-seg display Upper level: Red, 5 digits Lower level: Green, 5 digits	Dual 7-seg display Upper level: Red/Green, 2 colours, 5 digits Lower level: Green, 5 digits
Display range				-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
Display resolution				1 µm, 10 µm, 100 µm, 1,000 µm (selectable)
Output	Judgment output (selectable between NPN and PNP)			NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA/ch ^*2
	Response time (judgment output)			1.96 to 4031.72 ms ^*3
	Edge check output (selectable between NPN and PNP)			NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA, ^*2 response time 20 ms
	Analogue output (selectable among ±5V, 1-5 V, 0-5 V, 4-20 mA)	Voltage output	Output range	±5 V (full scale 10 V)
			Output resistance	100 Ω
			Maximum load resistance	―
			Repetition accuracy	±1 mV
			Display accuracy	±0.05 % of F.S.
			Temperature characteristics	±0.005 % of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgment output)
			Time constant	10 µs (90 % response)^*4
		Current output	Output range	4-20 mA (full scale 16 mA)
			Output resistance	―
			Maximum load resistance	350 Ω
			Repetition accuracy	±1.5 µA
			Display accuracy	±0.25 % of F.S.
			Temperature characteristics	±0.01% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgment output)
			Time constant	30 µs (90 % response)^*4
Input	Gain input			Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
	Reset input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Timing input			Input time: 2 ms or more, Response delay time: 2 ms or less
	Zero shift input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Bank A input/Bank B input			Input time: 20 ms or more, Response delay time: 20 ms or less ^*3
	Laser emission stop input			Input time: 2 ms or more, Response delay time: 2 ms or less
Rating	Power voltage			10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
Environmental resistance	Pollution degree			2
	Ambient temperature			-10 to +50 °C (No freezing)
	Relative humidity			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z axis
Material				Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
Accessories				Main body × 1, Instruction manual × 1	Main body × 1, Panel mounting bracket × 1, Front protection cover × 1, Power supply and input/output cable (2 m) × 1, Instruction manual × 1
Weight				Approx. 150 g (including supplied items)	Approx. 170 g (including supplied items)
^1 The power consumption with slave units installed is the total of each amplifier unit's power consumption. ^2 When expansion units are added: Max. 20 mA/ch ^3 For more details, refer to the User's Manual. ^4 Delay time that occurs from the analogue output circuit after the judgment is output.