Specs Two-colour Digital Display Pressure Sensor AP-30 series

Model

AP-31P

AP-32P

AP-33P

AP-34P

Image

Type

Negative pressure, PNP

Positive-pressure, PNP

Compound pressure, PNP

Rated pressure

0 to -1.013 bar (0 to -101.3 kPa)

0 to 1.000 bar (0 to 100.0 kPa)

0 to 10.00 bar (0 to 1.000 MPa)

1.013 to -1.013 bar (101.3 to -101.3 kPa)

Fluid type

Air or non-corrosive gases

Type of pressure

Gauge pressure

Display

3 1/2-digit, 2-colour, 7-segment LED (Character height: 11 mm)

Display resolution

0.001 bar, 0.1 inchHg, 0.1 kPa, 1 mmHg

0.001 bar, 0.02 Psi, 0.1 kPa, 0.001 kgf/cm²

0.01 bar, 0.2 Psi, 0.001 Mpa, 0.01 kgf/cm²

0.002 bar, 0.1 inchHg, 0.2 kPa, 2 mmHg

Detectable pressure range

-15 to +110 % of F.S.

Display temperature characteristic

±1 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C)

Temperature fluctuation for analogue output

±2 % max. (of F.S.) of detecting pressure at 25 °C (0 to 50 °C)

Response time (Chattering prevention function)

2.5/5/100/500 ms (selectable)

I/O

Analogue output

1 to 5 V (Load impedance: 47 kΩ min.)

Control output

2 PNP open-collector: 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable)

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

50 mA (at 24 V) or less, 90 mA (at 12 V) or less

Environmental resistance

Pressure resistance

5.0 bar (500 kPa)

1.5 MPa (15 bar)

5.0 bar (500 kPa)

Ambient temperature

0 to +50 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Material

Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone,
Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable

Weight

Approx. 120 g (including 2 m cable)