Specs Clamp-on Micro Flow Sensor FD-X series

Sensor head

Model				FD-XS1	FD-XS8	FD-XS20
Image
Supported pipe materials				Metal pipes, Plastic pipes (soft/hard) ^*1
Supported fluids				Liquids (water, oil, adhesive, grease, chemical solution, etc.) ^*1
Supported fluid temperature				0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature)
Clamp set model	Plastic pipe/tube attachment			FD-XC1R1, FD-XC1R2	FD-XC8R1, FD-XC8R2, FD-XC8R3	FD-XC20R1, FD-XC20R2, FD-XC20R3, FD-XC20R4
	Metal pipe attachment			FD-XC1M^*2	FD-XC8M^*2	FD-XC20M1, FD-XC20M2^*2
Maximum rated flow rate				0 to 1000 mL/min	Outer diameter of pipe ø 6, 1/4 " (6.35 mm) : 0 to 3000 mL/min Outer diameter of pipe ø 8: 0 to 8000 mL/min	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10, ø 10.5: 0 to 15.00 L/min Outer diameter of pipe ø 12, 1/2 " (12.7 mm) , ø 13.8: 0 to 20.00 L/min
Zero cut flow rate				20 mL/min^*3 (variable, default)	40 mL/min^*3 (variable, default)	0.10 L/min (standard), 40 mL/min (high resolution^7)^3 (variable, default)
Display resolution	Instantaneous flow rate			0.1/1/10 mL/min (Displayed on controller)		0.001/0.01/0.1 L/min (standard), 0.1/1/10 mL/min (high resolution^*7) (Displayed on controller)
	Shot amount			0.001/0.01/0.1/1 mL (Displayed on controller)		0.001/0.01/0.1 L (standard), 0.001/0.01/0.1/1 mL (high resolution^*7) (Displayed on controller)
Repeatability	Plastic pipe /tube attachment	Response time: 50 ms	F.S.	±0.6 %^4^5	±0.1 %^4^5
			Instantaneous flow rate	±6 mL/min^4^5	Outer diameter of pipe ø 6, 1/4 " (6.35 mm): ±3 mL/min Outer diameter of pipe ø 8: ±8 mL/min^4^5	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10: ±15 mL/min Outer diameter of pipe ø 12, 1/2 " (12.7 mm) : ±20 mL/min^4^5
		Response time: 500 ms	Instantaneous flow rate	±1.9 mL/min^*4	Outer diameter of pipe ø 6, 1/4 " (6.35 mm) : ±1.0 mL/min Outer diameter of pipe ø 8: ±2.6 mL/min^*4	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10: ±4.7 mL/min Outer diameter of pipe ø 12, 1/2 " (12.7 mm) : ±6.3 mL/min^*4
	Metal pipe attachment	Response time: 50 ms	F.S.	±1 %^4^5	Outer diameter of pipe ø 6, 1/4 " (6.35 mm) : ±0.3 % Outer diameter of pipe ø 8: ±0.15 %^4^5	±0.15 %^4^5
			Instantaneous flow rate	±10 mL/min^4^5	Outer diameter of pipe ø 6, 1/4 " (6.35 mm) : ±9 mL/min Outer diameter of pipe ø 8: ±12 mL/min^4^5	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10, ø 10.5: ±23 mL/min Outer diameter of pipe ø 12, 1/2 " (12.7 mm) , ø 13.8: ±30 mL/min^4^5
		Response time: 500 ms	Instantaneous flow rate	±3.2 mL/min^*4	Outer diameter of pipe ø 6, 1/4 " (6.35 mm) : ±2.9 mL/min Outer diameter of pipe ø 8: ±3.8 mL/min^*4	Outer diameter of pipe 3/8 " (9.53 mm) , ø 10 ø 10.5: ±7.2 mL/min Outer diameter of pipe ø 12, 1/2 " (12.7 mm) , ø 13.8: ±9.5 mL/min^*4
Hysteresis				Variable
Integrated unit display				0.1/1/10/100/1000/10000 mL (displayed on controller)		0.01/0.1/1/10/100 L (standard), 0.1/1/10/100/1000/10000 mL (high resolution^*7) (displayed on controller)
Display method				Status indicator
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529) , IP68G (JIS C0920) ^*6
	Ambient temperature			0 to 60 °C (No freezing)	-10 to 60 °C (No freezing)
	Relative humidity			35 % to 85 %RH (No condensation)
	Vibration resistance			10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction
	Shock resistance			50 G 11 ms, 3 times each for X,Y,Z direction
Material	Sensor head			Head body: PPS/PPSU, in-cable amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM
	Clamp set	For plastic pipe		Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7
		For metal pipe		Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7
Weight				Approx. 230 g	Approx. 250 g	Approx. 260 g
^1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. ^2 When using stainless steel or iron pipes, the ideal pipe wall thickness is as follows, FD-XS1: approx. 0.5 mm, FD-XS8: approx. 1 mm, FD-XS20: approx. 1 to 2 mm. FD-X signal strength and stability will decrease as the thickness of the pipe wall increases or decreases from the suggested size. ^3 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. ^4 This specification is valid when the flow velocity distribution is stable. This value does not take into account the effects of pulsation or fluctuations in flow velocity distribution due to facility factors. Convert the F.S. (full scale value) listed in the table according to the rated flow range. ^5 The longer the response time is set, the more repeatability is improved. As a guideline, use √ (50 ms/response time) times. ^6 The connector part of the sensor head cable is IP65/IP67. ^*7 Only controllers with serial numbers beginning with “G” (FD-XA1/XA2/XA5) are supported.

Controller

Model		FD-XA1	FD-XA2	FD-XA5
Image
Type		DIN rail type, main unit	DIN rail type, expansion unit	Panel type, main unit
Display method		Output indicator, 4-digit 7 segment display, OLED, Stability level display
Display refresh frequency		Instantaneous flow: approx. 5 times/second, Discharge amount/Accumulated flow approx. 30 times/second
Response time		50 ms/100 ms/500 ms/1 s/2.5 s/5 s/10 s/30 s/60 s (selectable, default: 500 ms)
Integration data storage interval		Written to the memory every 10 seconds
Memory back up		EEPROM (data storage period: more than 10 years, number of data rewritable times: 1 million times or more)^*1
Detection mode	ch.1	Instantaneous flow rate mode/Area mode/Pulse output (+) mode/Integrated flow mode/Shot mode (selectable)
	ch.2	Instantaneous flow rate mode/Area mode/Pulse output (-) mode/Shot mode/Error output mode/Bubble alert mode/Error + bubble alert mode (selectable)
Input/output	Output	NPN/PNP setting switch Open collector output: 30 V or lower, main unit: 50 mA or lower/ch.^*2/expansion unit: 20 mA or lower/ch., residual voltage: 2 V or lower
	Analogue output	4-20 mA/0-20 mA (selectable) load resistance: 500 ohms or lower	-	4-20 mA/0-20 mA (selectable) load resistance: 500 ohms or lower
	External input	Flow rate zero input/shot sampling input/integrated flow reset input/zero shift input (selectable) Short circuit current: NPN 1 mA or lower/PNP 2 mA or lower, input time: 20 ms or longer
Network support		IO-Link ^*3	Supports NU series	IO-Link ^*3
Unit expansion		Up to 7^*4 per main unit		-
Protection circuit		Power supply reverse connection protection, power surge protection, output short circuit protection, output surge protection
Power supply	Power voltage	20 to 30 VDC including 10 % ripple (P-P) , Class 2
	Current consumption	195 mA or lower (including the sensor head, excluding the load current)	185 mA or lower (including the sensor head, excluding the load current)	195 mA or lower (including the sensor head, excluding the load current)
Environmental resistance	Ambient temperature	-10 to +50 °C (No freezing)
	Relative humidity	35 % to 85 %RH (No condensation)
	Vibration resistance	10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction
	Shock resistance	100 m/s² (approx. 10 G) 16 ms pulse, 1000 times each for X,Y,Z direction
Material		Main body case/front sheet: PC, Key top: POM, Cable: PVC
Weight		Approx. 210 g	Approx. 180 g	Approx. 210 g
^1 Internal data for full time recording can be read by USB (Ver.2.0) communication. ^2 20 mA or lower/ch when adding expansion units. ^3 IO-Link: Specification v1.1/COM2 (38.4 kbps) is supported. If the end of the cable needs to be an M12 connector when supporting IO-Link communication, connect an M12 conversion connector (OP-88296) to the cable. ^4 Consult the manual for the number of serially-connectable devices to the N-bus.