3-Axis Hybrid Laser Marker

MD-X series

This model has been discontinued.
Compliance with the certification standard is ensured as of the time of shipment from our company.

Recommended Replaceable Products: 3-Axis Hybrid Laser Marker Wide area - MD-X2520A

3-Axis Hybrid Laser Marker Wide area MD-X2520

MD-X2520 - 3-Axis Hybrid Laser Marker Wide area

*Please note that accessories depicted in the image are for illustrative purposes only and may not be included with the product.

Specifications

Model		MD-X2520
Type		Marking unit (controller + head) 25 W Wide area
Handy console		MC-P1
3D function add-in (sold separately)		MD-AD-3D
XY tracking add-in (sold separately)		MD-AD-XYT
Z tracking add-in (sold separately)		MD-AD-ZT
2D code reader add-in (sold separately)		MD-AD-2DR/MD-AD-2DRA
Marking method		XYZ 3-Axis simultaneous scanning method
Marking laser	Type	YVO₄ laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA(CDRH) Part 1040.10) ^*1
	Wavelength	1064 nm
	Output	25 W
Q-switch frequency		CW (continuous wave), 1 to 400 kHz
Distance laser		Semiconductor laser Wavelength: 683 nm Output: 5.0 mW Class 3R laser product (IEC60825-1, JIS6802, FDA (CDRH) Part1040.10) ^*1
Guide laser/working distance pointer		Semiconductor laser, wavelength: 655 nm output: 1.0 mW Class 2 Laser Product (IEC60825-1, JIS6802, FDA(CDRH) Part 1040.10) ^*1
Marking area		330 × 330 × 42 mm
Standard working distance (±variable width)		300 mm (±21 mm)
Marking resolution		5 μm
Scan speed		Max. 8000 mm/s
Character type	Font	KEYENCE original font (numbers, letters, katakana, hiragana, kanji), user font, TrueType font, OpenType font ^*2
	Barcode	CODE39/ITF/2of5/NW7 (CODABAR)/JAN/CODE128/EAN/UPC-A/UPC-E/CODE93
	2D code	QR code, micro QR code, DataMatrix (ECC200/GS1 DataMatrix)
	GS1 DataBar	GS1 DataBar/GS1 DataBar CC-A/GS1 DataBar Stacked/GS1 DataBar Stacked CC-A/ GS1 DataBar Limited/GS1 DataBar Limited CC-A/GS1 DataBar Truncated/GS1 DataBar Truncated CC-A
	Logo image	Custom character font and logo (CAD) data, BMP/JPEG/PNG/TIFF
Marking conditions	Workpiece style	Stationary marking, Moving marking (constant, encoder)
	Character size (height/width)	0.1 to 330 mm
	No. of registered jobs	2000 max.
	No. of setting blocks	256
Input/output		Terminal block I/O, MIL connector I/O, laser safety module control I/O ^*3
Interface		RS-232C/USB2.0/Ethernet (100BASE-TX/10BASE-T) ^*4
Marking head installation direction		All directions
Marking head cable length		4.3 ±0.1 m
Cooling method		Forced air cooling
Applicable regulations		EU directives (EMC Directive, Low Voltage Directive, RoHS Directive)/EN standards (EN61010-1, EN60825-1, EN62471, EN55011, EN61000-6-2, EN50581)/ CSA standards and UL standards (CAN/CSA C22.2 No.61010-1, UL61010-1)/North American regulations (FCC Part 15B, ICES-001 Class A)/China RoHS
Rated voltage and power consumption		100 to 240 VAC ±10% 50/60 Hz, 850 VA max.
Environmental resistance	Enclosure rating	IP64 (marking head)
	Ambient temperature for transport/storage	-10 to 60°C (no freezing)
	Ambient humidity for transport/storage	30 to 85% (no condensation)
	Ambient temperature	0 to 40°C
	Relative humidity	30 to 85% (no condensation)
	Overvoltage category	II
	Pollution degree	2
Weight		Controller: 23.0 kg Marking head: 13.8 kg Console: 2.0 kg
^1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice. ^2 The only TrueType and OpenType fonts supported are those fonts whose "Font embeddability" property is set to "Installable" or "Editable." This property can be viewed from the Properties dialogue boxes of the fonts shown on the [Fonts] screen in [Control Panel]. ^3 Only when the laser safety module (MD-C1) is installed. ^4 There are two USB ports: a Type A connector for connecting USB memory devices or a USB mouse and a Type B connector that is the dedicated port for Marking Builder Plus (ActiveX). The Ethernet port supports communication with Marking Builder Plus (ActiveX), TCP/IP communication, EtherNet/IP™ and PROFINET.

Data Sheet (PDF) Other Models